Tcore

Only the essentials for canal measurement,
ready to install in booth or processing plant

IP65 electrical cabinet

Modular sensor mounting

Internet connectivity via Ethernet or multiband network (2G/3G/4G)

Flexible energization, connected to the electrical grid or with solar panels (off-grid)

Watchdog System
to minimize error rate
electronic

Internal hardware and software that minimizes the system's error rate, ensuring its proper functioning.

Central CPU with a high reliability rate(over 99%*)

*More than 99% of the time, the equipment will be functioning properly. This is achieved through internal hardware and software (Capta-Watchdog) that minimizes the system's error rate, ensuring its proper functioning.

Total and flexible energy autonomy: Connection to the electrical grid or post with solar panel.

Option 1: Connection to the electrical grid

MPPT solar charge controller.
12V 30Ah deep cycle battery.
Wired connection to a nearby electrical splice point.

Total and flexible energy autonomy: Connection to the electrical grid or post with solar panel.

Option 2: Solar

Solar panel ranging from 30W to 300W.
Galvanized post of 5 meters and optional heights between 3 and 12 meters.
10A MPPT solar charge controller. 12V 33Ah deep cycle battery.

Connectivity wherever

Multi-band communication system (4G/3G/2G).
Industrial-grade antenna that is 20 times more effective than a conventional antenna.
Multi-carrier SIM card that seeks the best internet signal in each particular location.
Connection to local internet network via Ethernet cable.
(Optional) In case of no cellular signal, wireless connection system via LoRa or WiFi.
(Optional - In Development) In case of no cellular signal, satellite connection system.

Water Level Measurement
with high accuracy and fault tolerance.
Temperature-compensated ultrasonic level sensors; with 2m, 4m, and 6m range and up to 0.25% accuracy relative to its total range.
(Optional)Temperature-independent radar level sensors with a 7m range and ±2mm accuracy.
Velocity Measurement
in channels, partially filled pipes, or under pressure.
Doppler sensor submerged at the bottom of the channel with redundant level sensors, such as hydrostatic and ultrasonic pressure sensors.
Ideal for partially filled pipes transitioning from open channel flow to pressurized flow, or channels without a flow measurement section with no sediment accumulation. (Optional)
Radar Velocity Sensor for contactless surface velocity measurement.
Radar sensor for contactless surface velocity measurement with water.
Suitable for measurement without a flow section, allowing for flow estimation.
(Optional)