CFT
Micro
The safest, easiest to install, reliable, accurate and versatile telemetry system, with power option for connection to the grid or solar panel on a pole.
Safe, easy to install and reliable
Manual operation
Easy to install
- Direct anchoring on existing civil works with minimum condition of concrete wall of 18 cm thick, 18 cm high and 50 cm long.
- Fast installation in about half an hour
CFT Micro - High Standard Reliability
Rate of
reliability
over 99%*.
*More than 99% of the time the equipment will be doing its job properly.
Total and flexible energy autonomy:
Connection to mains or pole with solar panel.
Option 1: Mains connection
- MPPT solar charge controller.
- Deep cycle battery of 30Ah at 12V.
- Wired connection to nearby electrical junction point.
Total and flexible energy autonomy:
Connection to mains or pole with solar panel.
Option 2: Solar
- Solar panel from 30W to 300W.
- Galvanized post of 5 meters and optional between 3 and 12 meters high.
- MPPT 10A solar charge controller.
Deep cycle battery of 33Ah at 12V. - Configuration of energy consumption according to measurement frequency.
Connectivity anywhere
that the equipment is
- Multi-band communication system (4G/3G/2G).
- High standard industrial application antenna 20X a conventional antenna.
- Multi-company SIM card, which searches for the best internet signal in each particular location.
- (Optional) In case there is no cellular signal, wireless connection system via LoRa or Wifi.
- (Optional – Under Development) In case there is no cellular signal, satellite connection system.
Electronic Watchdog System
to minimize error rate
Hardware and internal software to minimize the rate of system errors, ensuring its correct operation.
Versatility to adapt to different
installation conditions
High precision measurements
Water height measurement
high accuracy and robustness to failures.
Temperature compensated ultrasonic height sensors; 2, 4 and 6m range and up to 0.25% accuracy with respect to their total range.
(Optional) Radar type height sensors that do not require temperature compensation, 7m range with ±2mm accuracy.
Speed measurement
in channels, half-filled or pressurized pipes.
Doppler sensor submerged in the bottom of the channel with redundant height sensors, hydrostatic pressure type and ultrasonic.
Ideal for half-full pipes changing from regime to pressure flow, or channels without gauging section without sediment accumulation.
(Optional)
Radar Speed Sensor
for non-contact surface velocity measurement.
Radar for surface velocity measurement without water contact.
Suitable for measuring without gauging section, allowing to estimate the flow rate.
(Optional)
Hundreds of teams operating in many different contexts
“The CFT Micro equipment installed for the Junta de Vigilancia del Estero El Arrayán made it possible for us to have more clarity on the extractions of one of the main channels distributed by the Board.”
Mario Rodriguez – Advisor to the Junta de Vigilancia del Estero Arrayán.
